High Performance 3592
Refurbished IBM TotalStorage Enterprise TS1120 3592-E05 896-Track Tape Drive
Highlights
- Native data transfer rate is over twice as fast as a 3592-J1A, 7 times faster than a 3590H and 23 times faster than the fastest 3490E tape drive.
- A single cartridge can replace 896 3490E tapes, 71 3590B tapes, eighteen 3590E, twelve 3590H or 2.4 3592-J1A cartridges.
- Small size encourages you to install four 3592s in the same rack space as one 3590 tape drive.
- Requires half the power required by any 3590 and generates just 40% of the heat slashing power and cooling costs.
- Enterprise storage reliability exceeds all SDLT, LTO and 3490E based storage products.
- Multiple attachment options, including Fibre Channel, ESCON, and FICON.
Transfer Data Faster
The 3592-E05 Tape Drive supports a sustained native data transfer rate of 104 MB/sec. This increases data access speed, reducing backup and recovery times, as well as High Availability requirements.
Store Up to 2.1TB Per Tape!
A 3592 can store 700GB of uncompressed data on one cartridge. At 3:1 compression, capacity triples to 2.1TB. This is the equivalent of twelve 3590H cartridges.
The 3592 uses a single media type-the IBM TotalStorage Enterprise Tape Cartridge 3592-which can be reformatted as required.
Protect Your Data
The TS1120 3592-E05 optionally supports data encryption and key management for z/OS, z/VM, i5/OS, AIX, HP, Sun, Linux and Windows.
Choose The Best Connection for You
The 3592 is designed to integrate easily into a number of IBM Enterprise tape libraries, Sun StorageTek tape libraries or a stand-alone rack.
It also attaches readily to these platforms and operating systems:
- IBM iSeries AS/400
- IBM pSeries RS/6000
- IBM pSeries
- IBM AIX
- IBM OS/400
- HPUX
- Linux
- Microsoft Windows 2000, NT, Server 2003, XP
- Sun Solaris
To use the 3592-E05 with zSeries servers, S/390 servers, IBM OS/390, VSE/ESA, z/OS, z/VM operating systems you will need a IBM TotalStorage Enterprise Tape Controller 3590 Model A60 or Enterprise Tape Controller 3592 Model J70. The 3592 Model J70 creates the bridge between the 3592 tape drive and the IBM server ESCON and FICON interfaces.
The 3592 Model J70 Controller enables up to twelve 3592-E05s and as many as eight ESCON server attachments and up to four FICON server attachments. The maximum channel speed for ESCON attachments is 17MB/sec simplex; maximum distance (direct-attach) is 1.8 miles. FICON, of course, runs both faster (2GB/sec full-duplex) and farther 6.2 miles.
Make Fewer Mistakes
The 3592 Tape Drive was built to protect mission-critical data. The 3592 incorporates many features to improve its reliability such as an improved Error Correction Code (ECC) and servo tracks written on each tape cartridge to ensure accurate reading and writing. Media has also been designed to improve the reliability and archive life. In addition, each 3592 contains resident advanced diagnostics that monitor the operation of the drive and aid in fast resolution should a problem occur.
Reduce Downtime
Reliability is especially important for unattended system backup. The 3592's advanced identification of potential drive or media problems enables operators to avoid critical outages when they can least afford them. When problems do occur, better diagnostics make for quicker resolution.
Step Up to 3592-E05
Need to dump your old 36-track, 3590B, 3590E, 3590H and 3592-J1A tape drives to make room for your Comco 3592 E05s? We'll give you a fair trade and arrange to pick them up, too.
Specifications
Packaging
|
Rack-mounted
|
Characteristics
|
Recording technique
|
Linear serpentine
|
Number of tracks
|
896 tracks
|
Interface options
|
Fibre Channel, ESCON, and FICON
|
Performance
|
Uncompacted data rate
|
104 MB/sec
|
High-speed search speed
|
10 meters/sec
|
Max cartridge capacity (native)
|
700 GB
|
Max cartridge capacity (with 3:1 compression)
|
2.1 TB*
|
Dimensions
|
3.8 in H x 7.8 in W x 18.4 in D (95 mm x 198 mm x 467 mm)
|
Weight
|
Without power supply
|
12.5 lbs (5.7 kg)
|
Operating Environment
|
Temperature (media in use)
|
60 F to 90 F (16 C to 32 C)
|
Relative humidity
|
20% to 80%
|
Wet bulb
|
74 F (23 C) maximum
|
Heat output
|
307 BTU/hr
|
Power requirements
|
0.1 kVA
|
*Depending on data content
|